Installing the memory modules
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the memory modules and provides a visual representation of the installation procedure.
Steps
- Lift the flap to access the memory-module slot.
- Align the notch on the memory module with the tab on the memory-module slot.
- Slide the memory module firmly at an angle, into the memory-module slot.
- Press the memory module down until it clicks into place.
NOTE If you do not hear the click, remove the memory module and reinstall it.
NOTE Repeat step 2 to step 4 to install any other memory modules in your computer.
Data is not available for the Topic