Installing the coin-cell battery
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the coin-cell battery and provides a visual representation of the installation procedure.
![Image: Installing the coin-cell battery](https://dl.dell.com/topics/inspiron-7500-2n1-black-service-manual/images/GUID-5C2DC85D-3164-4F8E-85E3-35116FE06F68-low.jpg)
Steps
- Adhere the coin-cell battery to the slot on the palm-rest and keyboard assembly.
- Connect the coin-cell battery cable to the I/O board.
- Place the speaker cable and adhere the tape that secures the speaker cable and coin-cell battery cable to the palm-rest and keyboard assembly.
Data is not available for the Topic