Installing the fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the fan and provides a visual representation of the installation procedure.
![Image: Installing the fan](https://dl.dell.com/topics/inspiron-7500-2n1-black-service-manual/images/GUID-C0881D2B-93AF-43B7-8763-AED5B66AA2EB-low.jpg)
Steps
- Using the alignment posts, place the fan on the palm-rest and keyboard assembly.
- Replace the two screws (M2x2) that secure the system fan to the palm-rest and keyboard assembly.
- Connect the fan cable to the system board.
Data is not available for the Topic