Removing the power-button board
About this task
The following image indicates the location of the power button with fingerprint reader and provides a visual representation of the removal procedure.
![Image: Removing the power button with fingerprint reader](https://dl.dell.com/topics/inspiron-7500-2n1-black-service-manual/images/GUID-78AB45F5-424A-4892-990F-8A058EE8213D-low.jpg)
Steps
- Remove the two screws (M1.6x2.5) that secure the power-button bracket to the palm-rest and keyboard assembly.
- Lift the power-button bracket off the palm-rest and keyboard assembly.
- Lift the flap to access the fingerprint reader-board.
- Open the latch, and disconnect the power-button board cable from the fingerprint reader-board.
- Lift the power button board, along with its cable, off the slot on the palm-rest and keyboard assembly.
Data is not available for the Topic