Procedure to replace the M.2 2280 solid-state drive
- Align the notch on the solid-state drive with the tab on the M.2 slot and slide the solid-state drive into place.
- Insert the tab of the M.2 2280 thermal shield into the slot on the palm-rest and keyboard assembly.
- Replace the screw (M2x3) that secures the M.2 2280 thermal shield and solid-state drive to the palm-rest and keyboard assembly.
- Tighten the captive screw
that secures the M.2 2280 thermal shield to the
palm rest and keyboard assembly.
Data is not available for the Topic