Procedure to remove the M.2 2280 solid-state drive
- Loosen the captive screw
that secures the M.2 2280 thermal shield to
the palm-rest and keyboard assembly.
- Remove the screw (M2x3) that secures the M.2 2280 thermal shield and the solid-state drive to the palm-rest and keyboard assembly.
- Slide and remove the M.2 2280 thermal shield from the slot on the palm-rest and keyboard assembly.
- Lift the solid-state drive at an angle and remove it from the M.2 slot on the system board.
Data is not available for the Topic