Procedure to remove the M.2 2230 solid-state drive
- Loosen the captive screw
that secures the M.2 2230 shield to
the palm-rest and keyboard assembly.
- Remove the screw (M2x3) that secures the M.2 2230 shield to the palm-rest and keyboard assembly.
- Slide and remove the tab on the M.2 2230 thermal shield from the slot on the palm-rest and keyboard assembly.
- Lift the solid-state drive and M.2 2230 thermal shield at an angle and remove it from the M.2 slot on the system board.
- Turn the M.2 2230 thermal shield over.
- Remove the screw (M2x2) that secures the solid-state drive to the M.2 2230 thermal shield.
- Lift the solid-state drive off the M.2 2230 thermal shield.
Data is not available for the Topic