Procedure
- Place the display panel on a flat and clean surface.
- Connect the display cable to the connector at the back of the display panel and close the latch to secure the cable.
- Adhere the tape that secures the display cable
to the back of the display panel.
- Place the display panel on the display
back-cover and antenna assembly.
- Replace the two screws (M2x3) that secure the display panel to the
display back-cover and antenna assembly.
- Replace the six screws (M2.5x2.5) that secure the display panel to the
display back-cover and antenna assembly.
Data is not available for the Topic