Procedure to replace M.2 2230 solid-state drive
- Place the solid-state drive into the slot at the back of the M.2 2230 thermal shield.
- Replace the screw (M2x2) that secures the solid-state drive to the M.2 2230 thermal shield.
- Turn over the solid-state drive and M.2 2230 thermal shield.
- Align the notch on the solid-state drive with the tab on the M.2 slot and slide the solid-state drive into place.
- Insert the tab on the M.2 2230 thermal shield into the slot on the palm-rest and keyboard assembly.
- Tighten the captive screw
that secures the M.2 2230 thermal shield to the
palm-rest and keyboard assembly.
- Replace the screw (M2x3) that secures the M.2 2230 thermal shield to the palm-rest and keyboard assembly.
Data is not available for the Topic