Installing the M.2 2230 solid-state drive in M.2 slot two
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
NOTE Depending on the configuration ordered, your computer may support an M.2 2230 solid-state drive or an M.2 2280 solid-state drive in M.2 slot two.
NOTE If there is only one solid-state drive in the configuration you ordered, you can install another solid-state drive in the other M.2 slot. However, you may need a solid-state drive mounting bracket (sold separately) to install the additional solid-state drive.
NOTE This procedure applies only if you are installing an M.2 2230 solid-state drive in M.2 slot two.
NOTE Before installing your M.2 2230 or M,2 2280 solid-state drive, ensure that the mounting bracket is in the correct location. For more information, see
Installing the solid-state drive mounting bracket.
The figure indicates the location of the M.2 2230 solid-state drive that is installed in M.2 slot two and provides a visual representation of the installation procedure.
Steps
Slide the solid-state drive mounting bracket into the slot on the palm-rest and keyboard assembly, if it is not installed.
Align the notches on the M.2 2230 solid-state drive with the tabs in the M.2 slot two on the system board.
Slide the M.2 2230 solid-state drive into M.2 slot two on the system board.
Replace the screw (M2x3) that secures the M.2 2230 solid-state drive to the palm-rest and keyboard assembly.