Installing the memory modules
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the memory module and provides a visual representation of the installation procedure.
![Image: Installing a memory module](https://dl.dell.com/topics/inspiron-5505-service-manual/images/GUID-8CB52D04-5198-48BE-B3A8-A4B94849FE15-low.jpg)
Steps
- Lift the mylar and align the notch on the memory module with the tab on the memory-module slot.
- Slide the memory module firmly into the slot at an angle.
- Press the memory module down until it clicks into place.
NOTE If you do not hear the click, remove the memory module and reinstall it.
NOTE Repeat step 1 to step 3 to if you are installing other memory module.
Data is not available for the Topic