Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Inspiron 5505 Service Manual

Installing the M.2 2280 solid-state drive in M.2 slot two

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

NOTE Depending on the configuration ordered, your computer may support an M.2 2230 solid-state drive or an M.2 2280 solid-state drive in M.2 slot two.
NOTE If there is only one solid-state drive in the configuration you ordered, you can install another solid-state drive in the other M.2 slot. However, you may need a solid-state drive mounting bracket (sold separately) to install the additional solid-state drive.
NOTE This procedure applies only if you are installing a 2280 solid-state drive in M.2 slot two.
NOTE Before installing your M.2 2230 or M.2 2280 solid-state drive, ensure that the mounting bracket is in the correct location. For more information, see Installing the solid-state drive mounting bracket.

The figure indicates the location of the M.2 2280 solid-state drive that is installed in M.2 slot two and provides a visual representation of the installation procedure.

Image: Installing the 2280 solid-state drive in M.2 slot two

Steps

  1. Align the notches on the M.2 2280 solid-state drive with the tabs in M.2 slot two on the system board.
  2. Slide the M.2 2280 solid-state drive into M.2 slot two on the system board.
  3. Replace the screw (M2x3) that secures the M.2 2280 solid-state drive to the palm-rest and keyboard assembly.

Next steps

  1. Install the base cover.
  2. Follow the procedure in After working inside your computer.

  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\