Installing the 4-cell battery
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the 4-cell battery and provides a visual representation of the installation procedure.
![Image: Installing the 4-cell battery](https://dl.dell.com/topics/inspiron-5505-service-manual/images/GUID-6E084536-B4FB-4113-A5C7-097B588CC6CF-low.jpg)
Steps
- Place the battery on the palm-rest and keyboard assembly.
- Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly.
- Install the five screws (M2x3) that secure the 4-cell battery to the palm-rest and keyboard assembly.
- Connect the battery cable to the system board and adhere the tape that secures the battery cable to the system board.
Data is not available for the Topic