Removing the fan
About this task
The figure indicates the location of the fan and provides a visual representation of the removal procedure.
![Image: Removing the fan](https://dl.dell.com/topics/inspiron-5505-service-manual/images/GUID-D02361CE-D294-4878-94C9-25A243FC9480-low.jpg)
Steps
- Peel and lift the mylar covering the fan cable.
- Peel the tape, lift the latch, and then disconnect the I/O-board cable from the system board.
- Remove the I/O-board cable from the routing guides on the fan.
- Disconnect the fan cable from the system board.
- Remove the two screws (M2x2) that secure the fan to the palm-rest and keyboard assembly.
- Lift the fan off the palm-rest and keyboard assembly.
Data is not available for the Topic