Removing the I/O board
About this task
The figure indicates the location of the I/O board and provides a visual representation of the removal procedure.
Steps
- Peel off the tape that secures the I/O-board cable to the I/O board.
- Open the latch and disconnect the I/O-board cable from the I/O board.
- Open the latch and disconnect the fingerprint-reader cable from the I/O board.
- Remove the
screw (M2x2) and the screw (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
- Lift the I/O board off the palm-rest and keyboard assembly.
Data is not available for the Topic