Removing the touchpad
About this task
The figure indicates the location of the touchpad and provides a visual representation of the removal procedure.
![Image:Removing the touchpad](https://dl.dell.com/topics//inspiron-15-5501-service-manual/images/GUID-39894A27-D0BD-45D0-8E2D-5F471360AB39-low.jpg)
Steps
- Peel the adhesive tapes that secure the speaker cable to the touchpad bracket.
- Remove the speaker cable from the routing guide.
- Remove the three screws (M2x2) that secure the touchpad bracket to the palm-rest and keyboard assembly.
- Lift the touchpad bracket off the palm-rest and keyboard assembly.
- Open the latch and disconnect the touchpad cable from the system board.
- Remove the adhesive tapes that secure the touchpad bracket to the palm-rest and keyboard assembly.
- Remove the two screws (M2x2) that secure the touchpad bracket to the palm-rest and keyboard assembly.
- Lift the touchpad, along with the cable, off the palm-rest and keyboard assembly.
Data is not available for the Topic