Removing the power-adapter port
About this task
The figure indicates the location of the power-adapter port and provides a visual representation of the removal procedure.
![Image: Removing the power-adapter port](https://dl.dell.com/topics//inspiron-15-5501-service-manual/images/GUID-EDFD77B3-7BD4-4443-8F4F-34C6C8BABBD3-low.jpg)
Steps
- Remove the screw (M2.5x3.5) and the two screws (M2.5x5) that secure the left display hinge to the system board.
- Lift the left display-hinge plate to uncover the power-adapter port cable.
- Peel off the tape that adheres the power-adapter port cable to the system board.
- Disconnect the power-adapter port cable from its connector on the system board.
- Remove the screw (M2x3), and lift the power-adapter port.
- Lift the power-adapter port off the palm-rest and keyboard assembly.
Data is not available for the Topic