Installing the 3-cell battery
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the 3-cell battery and provides a visual representation of the installation procedure.
![Image: Installing the 3-cell battery](https://dl.dell.com/topics//inspiron-15-5501-service-manual/images/GUID-3B7E6FC4-7953-4A82-B9EA-3D05825E1554-low.jpg)
Steps
- Place the battery on the palm-rest and keyboard assembly.
- Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly.
- Install the four screws (M2x3) that secure the battery to the palm-rest and keyboard assembly.
- Connect the battery cable to the system board and adhere the tape that secures the battery cable to the system board.
Data is not available for the Topic