Procedure
- Remove the three
screws (M2.5x5) that secure the left hinge to the system board and
palm-rest assembly.
- Lift the left
hinge.
- Disconnect the power-adapter port cable from the system board.
- Note the power-adapter
port cable routing and remove it from the routing guides on the palm-rest and keyboard assembly.
- Remove the screw (M2x2) that secures the power-adapter port to the
palm-rest and keyboard assembly.
- Lift the power-adapter port, along with its cable, off the palm-rest and keyboard assembly.
Data is not available for the Topic