Procedure
NOTE: Applicable only to computers that are shipped with optical drive.
- Remove the screw (M2x2) that secures the optical-drive assembly
to the base cover.
- Using a screwdriver, push the optical drive through the slot to release the optical-drive assembly out of the optical-drive bay.
- Slide the optical-drive assembly out of the optical-drive bay.
- Remove the two screws (M2x3) that secure the optical-drive bracket
to the optical drive.
- Remove the optical-drive bracket from optical drive.
- Pull the optical-drive bezel carefully to remove it from the optical
drive.
Data is not available for the Topic