Removing the display panel
About this task
The following images indicate the location of the display panel and provides a visual representation of the removal procedure.
Steps
- Remove the six screws (M2.5x2.5) that secure the display panel to the display assembly.
- Remove the two screws (M2x2.5) that secure the display panel to the display assembly.
- Lift and rotate the display panel forward.
NOTE:Ensure that the display panel has a smooth and clean surface to rest on to prevent damage.
- Disconnect the display cable from the display panel.
- Peel the tape that secures the display-cable connector latch to the display panel.
- Lift the display-cable latch and disconect the display cable from the display panel.
- Lift the display panel off the display assembly.
NOTE:The display brackets are shipped together with the display panel, do not remove the display brackets from the display panel.
Data is not available for the Topic