Procedure
- Remove the two screws (M2x2) and two screws (M2.5x2.5) that secure the display panel to the
display back-cover and antenna assembly.
- Lift the display panel and turn it over.
- Peel the tape that secures the display cable to the back of the display
panel.
- Open the latch and disconnect the display cable from the display-panel
cable connector.
NOTE: : Do not pull and release the Stretch (SR) Tapes from the display
panel. There is no need to separate the brackets from the display
panel.
- Lift the display panel away from the display back-cover and antenna
assembly.
Data is not available for the Topic