Inspiron 5406 2-in-1 Service Manual

Screw list

NOTE:When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE:Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component.

NOTE:Screw color may vary with the configuration ordered.

Table 1. Screw listThe following table provides the different screws used in your computer.
Component	Secured to	Screw type	Quantity	Screw image
Base cover	Palm-rest and keyboard assembly	M2x4	6
Base cover	Palm-rest and keyboard assembly	M2x7 (captive screw)	3
Battery	Palm-rest and keyboard assembly	M2x3	5 (For computers shipped with a 4-cell battery) 4 (For computers shipped with a 3-cell battery)
Wireless-card bracket	Wireless card and system board	M2x3	1
Solid-state drive thermal bracket	Palm-rest and keyboard assembly	M2x3	1
Solid-state drive	Solid-state drive bracket	M2x3	1
Fan	Palm-rest and keyboard assembly	M2x2	2
Touchpad bracket	Palm-rest and keyboard assembly	M2x2	3
Touchpad	Palm-rest and keyboard assembly	M2x2	2
I/O board	Palm-rest and keyboard assembly	M2x3	1
Display hinges	Palm-rest and keyboard assembly	M2.5x 5	5
Power-button board	Palm-rest and keyboard assembly	M2x3	2
Power-button bracket (Only available in configurations with a fingerprint reader)	Palm-rest and keyboard assembly	M2x3	2
Power-adapter port	Palm-rest and keyboard assembly	M2x3	1
USB Type-C bracket	Palm-rest and keyboard assembly	M2x3	2
System board	Palm-rest and keyboard assembly	M2x2	2