Installing the WLAN card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the WLAN card and provides a visual representation of the installation procedure.
Steps
- Connect the antenna cables to the WLAN card.
The following table provides the antenna-cable color scheme for the wireless card that is supported by your computer.
Table 1. Antenna-cable color schemeThe following table provides the antenna-cable color scheme for the WLAN card of your computer.
Connectors on the wireless card
| Antenna-cable color
| Silkscreen marking
|
---|
Main
| White
| MAIN
| △ (white triangle)
|
Auxiliary
| Black
| AUX
| ▲ (black triangle)
|
- Align the notch on the WLAN card with the tab on the WLAN-card slot and insert the WLAN card at an angle into the WLAN-card slot.
- Place the WLAN-card bracket on the WLAN card.
- Align the screw hole on the WLAN-card bracket and the screw hole on the system board.
- Replace the screw (M2x3) that secures the WLAN card to the system board.
Data is not available for the Topic