Installing the M.2 2230 solid-state drive in M.2 slot two
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
NOTE If you have ordered a 3-cell (40 Wh) battery configuration, your computer can only support one solid-state drive in M.2 slot one. M.2 slot two is only available if you have ordered an Intel Optane storage.
NOTE If you have ordered a 4-cell (53 Wh) battery configuration, your computer may support an M.2 2230 solid-state drive, an M.2 2280 solid-state drive, or an Intel Optane storage in M.2 slot two.
NOTE Before installing your M.2 2230 solid-state drive, ensure that the mounting bracket is in the correct location. For more information, see
Replacing the solid-state drive mounting bracket.
NOTE If there is only one solid-state drive in the configuration you ordered, you can install another solid-state drive in the other M.2 slot. However, you may need a solid-state drive bracket (sold separately) to install the additional solid-state drive.
The following image indicates the location of the M.2 2230 solid-state drive that is installed in M.2 slot two and provides a visual representation of the installation procedure.
Steps
Align the notches on the solid-state drive with M.2 slot two on the system board.
Slide the solid-state drive into M.2 slot two on the system board.
Replace the screw (M2x3) that secures the solid-state drive to the palm-rest and keyboard assembly.
Place the solid-state drive bracket on the solid-state drive.
Align the screw holes on the solid-state drive bracket with the screw holes on the system board and the palm-rest and keyboard assembly.
Replace the screw (M2x3) that secures the solid-state drive bracket to the palm-rest and keyboard assembly.