CAUTION For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin can reduce the heat transfer capability of the thermal grease.
NOTE The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you touch it.
The following images indicate the location of the heat sink and provide a visual representation of the removal procedure.
Steps
In the reverse order (4>3>2>1), loosen the four captive screws (M2x5.85) that secure the heat sink to the system board.
NOTE The number of screws varies depending on the configuration ordered.
Lift the heat sink off the system board.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\