There are three different types of BIST to check the performance of display, power rail, and system board. These tests are important to evaluate if an LCD or system board needs a replacement.
M-BIST: M-BIST is the system board built-in self-test diagnostics tool that improves the diagnostics accuracy of system board embedded controller (EC) failures. M-BIST must be manually initiated before POST and can also run on a dead system .
L-BIST: L-BIST is an enhancement to the single LED error code diagnostics and is automatically initiated during POST.
LCD-BIST: LCD BIST is an enhanced diagnostic test that is introduced through Preboot System Assessment (PSA) on legacy systems.
Table 1. FunctionsFunctions of BIST
M-BIST
L-BIST
Purpose
Evaluates the health condition of the system board.
Checks if the system board is supplying power to the LCD by performing an LCD Power Rail test.
Trigger
Press the <M> key and the power button.
Integrated into the single LED error code diagnostics. Automatically initiated during POST.
Indicator of fault
Battery LED light with
Solid Amber
Battery LED error code of [2,8] blinks Amber x2, then pause, then blinks White x8.
Repair instruction
Indicates a problem with the system board.
Indicates a problem with the system board.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\