Replacing the SSD-2 support bracket
About this task
The figure provides a visual representation of the replace procedure.
Steps
- Remove the screw (M1.6x2.5) that secures the SSD support bracket to the palm-rest and keyboard assembly.
- Remove the SSD support bracket from the support bracket slot.
- Depending on the type of solid-state drive (M.2 2230/M.2 2280), align and insert the SSD support bracket into the support bracket slot.
- Replace the screw (M1.6x2.5) that secures the SSD support bracket to the palm-rest and keyboard assembly.
- Install the solid-state drive.
Data is not available for the Topic