Removing the I/O board
About this task
The following images indicate the location of the I/O board and provide a visual representation of the removal procedure.
![Image: Removing theI/O board](https://dl.dell.com/topics//inspiron-14-5401-service-manual/images/GUID-02E80C2E-EB66-4659-B7EA-CDED31E37B28-low.jpg)
Steps
- Peel the tape that secures the I/O-board cable to the I/O board.
- Open the latch and disconnect the I/O-board cable from the I/O board.
- Disconnect the fan cable from the I/O board.
- Open the latch and disconnect the fingerprint-reader cable from the I/O board.
- Remove the (M2x3) screw that secures the I/O board to the palm-rest and keyboard assembly.
- Lift the I/O board off the palm-rest and keyboard assembly.
Data is not available for the Topic