Removing the power button with optional fingerprint reader
About this task
The following images indicate the location of the base cover and provide a visual representation of the removal procedure.
![Image: Removing the power button with fingerprint reader](https://dl.dell.com/topics//inspiron-14-5401-service-manual/images/GUID-E15FF786-E704-4802-BE50-B7F0B8055712-low.jpg)
Steps
- Remove the screw (M2x2) that secures the power-button bracket to the palm-rest and keyboard assembly.
- Lift the power-button bracket off the palm-rest and keyboard assembly.
- Remove the two screws (M2x2.5) that secure the power button to the palm-rest and keyboard assembly.
- Peel off the fingerprint-reader board (optional) and the power-button cable from the palm-rest and keyboard assembly.
- Lift the power button with optional fingerprint-reader, along with the fingerprint-reader cable (optional), off the palm-rest and keyboard assembly.
Data is not available for the Topic