Removing the power-adapter port
About this task
The following image indicates the location of the power-adapter port and provides a visual representation of the removal procedure.
![Image: Removing the power-adapter port](https://dl.dell.com/topics//inspiron-5400-2n1-service-manual/images/GUID-CF136008-B14E-4AC4-8B90-7C5E6412111E-low.jpg)
Steps
- Remove the three screws (M2.5x5) that secure the right display-hinge to the palm-rest and keyboard assembly.
- Open the right display-hinge at an angle of 90 degrees.
- Peel the tape that secures the power-adapter port cable to the system board.
- Disconnect the power-adapter port cable from the system board.
- Remove the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly.
- Lift the power-adapter port along with its cable, off the palm-rest and keyboard assembly.
Data is not available for the Topic