Integrated Dell Remote Access Controller 9 User's Guide

PDF

Prerequisites before enabling Auto Config

Before enabling the Auto config feature, make sure that following are already set:

Supported network share (NFS, CIFS, HTTP and HTTPS) is available on the same subnet as the iDRAC and DHCP server. Test the network share to ensure that it can be accessed and that the firewall and user permissions are set correctly.
Server configuration profile is exported to the network share. Also, make sure that the necessary changes in the SCP file are complete so that proper settings can be applied when the Auto Config process is initiated.
DHCP server is set and the DHCP configuration is updated as required for iDRAC to call the server and initiate the Auto Config feature.