Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell G3 17 Service Manual

PDF

Procedure

  1. Connect the battery cable to the system board, if applicable.
  2. Adhere the tape that secures the battery cable to the system board.
    • CAUTION: To avoid accidental damage to the power-adapter port, do not press the base cover against the power-adapter port when you snap the base cover to the computer base.
    Image: Replacing the battery cable
  3. Place the base cover on the palm rest and keyboard assembly, and snap the base cover into place starting from the power-adapter port. Image: Place the base cover on the palm rest and keyboard assembly, and snap the base cover into place starting from the power-adapter port
  4. Align the tabs on the base cover with the slots on the palm-rest assembly and snap it into place.Image: Align the tabs on the base cover with the slots on the palm-rest assembly and snap it into place
  5. Tighten the two captive screws (M2.5) that secure the base cover to the palm rest and keyboard assembly.
  6. Replace the 10 screws (M2.5x7) that secure the base cover to the palm rest and keyboard assembly. Image: Replacing the base cover
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\