Removing the touchpad
About this task
The following image indicates the location of the touchpad and provides a visual representation of the removal procedure.
Steps
- Remove the speaker and antenna cables from the routing guides on the palm-rest and keyboard assembly.
- Remove the two (M2x4) screws that secure the routing-guide brackets to the palm-rest and keyboard assembly.
- Lift the routing-guide bracket off the touchpad bracket.
- Remove the three (M2x2.5) screws that secure the touchpad bracket to the palm-rest and keyboard assembly.
- Lift the touchpad bracket off the touchpad.
- Open the latch and disconnect the touchpad cable from the system board.
- Peel the touchpad cable from the touchpad.
- Remove the two (M2x2) screws that secure the touchpad to the palm-rest and keyboard assembly.
- Lift the touchpad off the palm-rest and keyboard assembly.
Data is not available for the Topic