CAUTION:To prevent damage to the memory module, hold the memory module by the edges. Do not touch the components or the metallic contacts on the memory module as electrostatic discharge (ESD) can inflict severe damage on the components. To read more about ESD protection, see
ESD protection.
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the memory module and provides a visual representation of the installation procedure.
Steps
Align the notch on the memory module with the tab on the memory-module slot.
Slide the memory module firmly into the slot at an angle.
Press the memory module down until it clicks into place.
NOTE:If you do not hear the click, remove the memory module and reinstall it.
NOTE:Repeat step 1 to step 3 to install the other memory module, if available on your computer.