Installing the wireless card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the wireless card and provides a visual representation of the installation procedure.
![Image: Installing the wireless card](https://dl.dell.com/content/guides/public/Html/dell-g16-7620-service-manual/images/GUID-19A01012-1FEA-4223-9BAA-62E8A58453EF-low.jpg)
Steps
- Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card supported by your computer.
Table 1. Antenna-cable color schemeThe following table provides the antenna-cable color scheme for the WLAN card of your computer.
Connectors on the wireless card
| Antenna-cable color
|
---|
Main (white triangle)
| White
|
Auxiliary (black triangle)
| Black
|
- Align the notch on the wireless card with the tab on the M.2 card slot and insert the wireless card at an angle into the M.2 card slot.
- Align and place the wireless-card bracket on the wireless card.
- Replace the screw (M2x4) to secure the wireless card to the system board.
Data is not available for the Topic