Installing the power-adapter port
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the power-adapter port and provides a visual representation of the installation procedure.
Steps
- Place the power-adapter port into the slot and adhere the power-adapter port cable on the system board.
- Connect the power-adapter port cable to the system board.
- Align and place the power-adapter port bracket over the power-adapter port.
- Replace the two screws (M2x4) to secure the power-adapter port bracket to the palm-rest and keyboard assembly.
Data is not available for the Topic