Installing the keyboard-controller board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the keyboard-controller board and provides a visual representation of the installation procedure.
Steps
- Using the alignment posts, place the keyboard-controller board into the slot on the palm-rest and keyboard assembly.
- Replace the screw (M2x2) that secures the keyboard-controller board to the palm-rest and keyboard assembly.
- Connect the keyboard-backlight cable to the keyboard-contoller board and close the latch to secure the cable.
- Connect the keyboard cable to the keyboard-controller board and close the latch to secure the cable.
Data is not available for the Topic