Installing the memory module
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the memory module and provides a visual representation of the installation procedure.
![Image: Removing the memory module](https://dl.dell.com/content/guides/public/Html/dell-g15-5520-service-manual/images/GUID-2B3E5B66-4D76-4816-B5AF-996F5FABB21D-low.jpg)
Steps
- Align the notch on the memory module with the tab on the memory-module slot.
- Slide the memory module firmly into the slot at an angle.
- Press the memory module down until it clicks into place.
NOTE:If you do not hear the click, remove the memory module and reinstall it.
NOTE:Repeat step 1 to step 3 to install the other memory module, if available on your computer.
Data is not available for the Topic