Dell G15 5510 Service Manual

Removing the speakers

About this task

The following images indicate the location of the speakers and provide a visual representation of the removal procedure.

NOTE:The image is applicable to computers that are shipped with the NVIDIA GeForce GTX 1650, NVIDIA GeForce RTX 3050, or NVIDIA GeForce RTX 3050 Ti GPU.

NOTE:The image is applicable to computers that are shipped with the NVIDIA GeForce RTX 3060 GPU.

NOTE:The image above is of Dell G15 5511, and it is used for reference.

1. Note the routing of the cable that connects the left speaker to the right speaker and remove it from the routing guides on the palm-rest and keyboard assembly.
   NOTE:Note the position of the rubber grommets before lifting the speakers.
2. Peel the tape that adheres the speaker cable to the palm-rest and keyboard assembly.
   NOTE:Note the routing of the speaker of cable and remove it from under the USB board before disconnecting the speaker cable.
3. Disconnect the speaker cable from the I/O board and release the cable from below the USB board, if applicable.
   NOTE:This step is applicable to computers that are shipped with the NVIDIA GeForce GTX 1650, NVIDIA GeForce RTX 3050, or NVIDIA GeForce RTX 3050 Ti GPU.
4. Disconnect the speaker cable from the system board and release the cable from below the USB board, if applicable.
   NOTE:This step is applicable to computers that are shipped with the NVIDIA GeForce RTX 3060 GPU.
5. Lift the speakers, along with the cable, off the palm-rest and keyboard assembly.