Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell G15 5510 Service Manual

Removing the solid-state drive in SSD slot one

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.

About this task

NOTE:Your computer has two solid-state drive slots. The solid-state drive 1 slot is located at the bottom left corner of the system board and the solid-state drive 2 slot is located at the bottom right corner of the system board. Both slots support M.2 2230 and M.2 2280 SSDs.
NOTE:For more information about Dell qualified solid-state drives supported by your computer, see Parts & Accessories at https://www.dell.com/support..
NOTE:This procedure applies only to computers shipped with a 2230 solid-state drive installed in SSD slot one.

The following image indicates the location of the 2230 solid-state drive that is installed in SSD slot one and provides a visual representation of the removal procedure.

Image: Removing the solid-state drive

Steps

  1. Remove the two screws (M2x4) that secure the thermal shield to the solid-state drive and the system board.
  2. Lift the thermal shield off the palm-rest and keyboard assembly.
  3. Slide and lift the solid-state drive off the slot on the system board.

  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\