Installing the
touchpad
- Place the touchpad into the slots on the computer.
- Tighten the M2xL3 screws that secure the touchpad
to the system.
- Affix the adhesive tape that secures the touchpad
cable to the touchpad.
- Place the metal bracket and tighten the M2xL3 screws that secure
the metal bracket to the touchpad..
- Connect the touchpad cable to its connector
on the system board.
- Install the:
- battery
- base cover
- microSD card
- Follow the procedure in After working inside
your computer.
Data is not available for the Topic