Removing the
system board
- Follow the procedure in Before working inside
your computer.
- Remove the:
- microSD card
- base cover
- battery
- display assembly
- Disconnect the following cables from their connectors:
- WLAN antenna cables from the WLAN card
[1].
- Touchpad cable from its connector on the
system board [2].
- Keyboard cable from its connector on the
system board [3].
- Then,
- Remove the screw on the metal bracket covering
the display cable connector [1].
- Lift the metal bracket off the display
cable connector [2].
- Disconnect the display cable from its connector
on the system board [3].
- Remove the screw securing the retaining
metal bracket to the system board [4].
- Lift the retaining metal bracket off the
system board [5].
- Then:
- Disconnect the <engineering input> from
its connector on the system board [1].
- Disconnect the audio board connector [2]
and peel off the adhesive securing the cable to the system board [3].
- Disconnect the speaker cable from its connector
[4] and unroute the cable from the cable guide [5].
- Remove the M2xL3 screws and lift the system
board off the computer.
Data is not available for the Topic