Installing the
system board
- Align the system board with the screw holders on the computer.
- Tighten the M2xL3 screws to secure the system board to the computer.
- Route the speaker through the cable guide and
connect the speaker cable to the its connector.
- Affix the adhesive of the audio board cable
to the system board and connect the audio board cable to its connector.
- Connect the <engineering input> cable to
its connector on the system board.
- Replace the metal retaining bracket and tighten
the screw to secure it to the system board.
- Connect the display assembly cable to its
connector.
- Place the metal bracket on the display cable
connector and tighten the screw.
- Connect the keyboard and touchpad cables to
their connectors on the system board.
- Connect the antenna cables to the WLAN card.
- Install the:
- display assembly
- battery
- base cover
- microSD card
- Follow the procedure in After working inside
your computer.
Data is not available for the Topic