Removing the wireless card
About this task
The following image(s) indicate the location of the wireless card and provides a visual representation of the removal procedure.
![Image: Removing the wireless card](https://dl.dell.com/content/guides/public/Html/alienware-x14-r2-service-manual/images/GUID-1F409E55-B975-46F0-B4A5-A4413DE0C2CE-low.jpg)
Steps
- Remove the screw (M2x3) that secures the wireless card thermal shield to the wireless card and palm-rest and keyboard assembly.
NOTE:The wireless card thermal shield is applicable for computers shipped with certain configurations only.
- Lift the wireless card thermal shield off the palm-rest and keyboard assembly.
- Remove the screw (M1.6x1.8) that secures the wireless-card bracket to the wireless card and palm-rest and keyboard assembly.
- Slide and remove the wireless-card bracket off the wireless card.
- Disconnect the antenna cables from the wireless card.
- Slide and remove the wireless card from the wireless-card slot.
Data is not available for the Topic