Alienware x14 R2 Service Manual

PDF

Screw list

NOTE:When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE:Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component.

NOTE:Screw color may vary with the configuration ordered.

Table 1. Screw listThe following table shows the list of screws used in your computer and the component it is secured to.
Component	Screw type	Quantity	Screw image
Base cover	M2.5x5	2
Base cover	M2.5x5 (captive screws)	4
Battery	M2x4	6
Wireless-card bracket	M2x3	1
Wireless-card thermal shield	M1.6x1.8	1
Rear I/O cover	M1.6x3	2
Antennas	M1.6x3	4
Solid-state drive thermal shield	M1.6x1.8	1
Touchpad	M1.6x1.8	8
Keyboard-controller board bracket	M1.6x1.5	5
Display-cable bracket	M1.6x1.8	2
Display-cable holder	M2x3	4
Display hinges	M2.5x3.8	8
System board	M2x4	9
Headset port	M1.6x3	1
Fan and heat-sink assembly	M2x3	6
I/O-board	M2x3	2
Power button	M1.2x1.6	1