Installing the rear I/O-cover
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the rear I/O-cover and provides a visual representation of the installation procedure.
![Image: Installing the rear I/O-cover](https://dl.dell.com/content/guides/public/Html/alienware-x14-r2-service-manual/images/GUID-37AC17F0-C5A1-4470-8E46-13AE582C297B-low.jpg)
Steps
- With the correct orientation, slide the rear I/O-cover into the palm-rest and keyboard assembly, and snap it into place.
- Replace the two screws (M1.6x3) that secure the rear I/O-cover to the palm-rest and keyboard assembly.
Data is not available for the Topic