Installing the antennas
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the wireless card and provides a visual representation of the installation procedure.
![Image: Installing the antennas](https://dl.dell.com/content/guides/public/Html/alienware-x14-r2-service-manual/images/GUID-9E65865D-7FF1-4118-A0EB-15EA724A1990-low.jpg)
Steps
- Align and place the left and right antennas on the slot on the palm-rest and keyboard assembly.
- Replace the four screws (M1.6x3) that secures the left and right antennas to the palm-rest and keyboard assembly.
- Route the antenna cables onto the routing guides on the palm-rest and keyboard assembly.
- Adhere the tape that secures the antenna cables to the palm-rest and keyboard assembly.
Data is not available for the Topic