|
Integrated NIC
|
Enables or disables the Integrated NIC.
Default: Enabled
|
|
USB Emulation
|
Enables or disables the USB emulation feature. This feature defines how the BIOS, in the absence of a USB-aware operating system, handles USB devices. USB emulation is always enabled during POST.
NOTE:You cannot boot any type of USB device (floppy, hard drive, or memory key) when this option is off.
Default: Enabled
|
|
USB PowerShare
|
Enables or disables USB PowerShare.
Default: Enabled
|
|
USB Wake Support
|
Enables or disables the USB Wake Support.
Default: Enabled
|
|
SATA Operation
|
Allows you to configure the operating mode of the integrated SATA hard drive controller.
Default: AHCI
|
|
Adapter Warnings
|
Allows you to choose if the computer should display warning messages when you use AC adapters that are not supported by your computer.
Default: Enabled
|
|
Function Key Behavior
|
Allows you to set function key or multimedia key as the default function key behavior.
Default: Multimedia key
|
|
Keyboard Backlight with AC
|
Selects the timeout value for the keyboard backlight when an AC adapter is plugged into the computer.
Default: 1 minute
|
|
Keyboard Backlight with Battery
|
Selects the timeout value for the keyboard backlight when the computer is running on battery power.
Default: 1 minute
|
|
Battery Health
|
Displays the battery health.
|
|
Battery Charge Configuration
|
Set the battery charge settings with a preselected custom charge start and stop.
Default: Adaptive
|
|
Advance Battery Charge Configuration
|
Set the battery charge settings with a preselected custom charge start and stop.
Default: Adaptive
|
|
Power on LID open
|
Selects the power-on option when the display is open.
Default: Disabled
|
|
Maintenance
|
|
|
Data Wipe on next boot
|
Enables or disables data wipe on the next boot.
Default: Disabled
|
|
BIOS Recovery from Hard Drive
|
Enables the user to recover from certain corrupted BIOS conditions from a recovery file on the user primary hard drive or an external USB key.
|
|
BIOS Auto-Recovery
|
Enables BIOS to automatically recover BIOS without user actions.
Default: Disabled
|
|
SupportAssist System Resolution
|
|
|
Auto OS Recovery Threshold
|
Controls the automatic boot flow for SupportAssist System Resolution Console and for the Dell operating system Recovery tool.
Default: 2
|
|
SupportAssist OS Recovery
|
Enables or disables the boot flow for the SupportAssist OS Recovery tool in the even of certain system errors.
Default: Disabled
|