Alienware x14 Service Manual

Removing the M.2 2280 solid-state drive

Prerequisites

Follow the procedure in Before working inside your computer.
Remove the base cover.

About this task

NOTE:The following procedure applies only to computers shipped with an M.2 2280 solid-state drive.

NOTE:The M.2 card supported on this slot depends on the configuration ordered. Supported card configurations. Supported card configurations:

M.2 2230 solid-state drive + 2230 mounting bracket
M.2 2280 solid-state drive

The following image(s) indicate the location of the M.2 2280 solid-state drive and provides a visual representation of the removal procedure.

Image: Removing the solid-state drive

Steps

Remove the screw (M1.6x1.8) that secures the solid-state drive thermal shield to the solid-state drive and palm-rest and keyboard assembly.
Lift and remove the solid-state thermal shield off the solid-state drive.
Slide and remove the solid-state drive from the solid-state drive slot.